Prince August bundle A011 Airbrush & AE01 Compressor
Prince August bundle A011 Airbrush & AE01 Compressor :
In this box you will find the Prince-August A011 double action airbrush. It is equipped with three nozzles and three needles of 0,2 mm, 0,3 mm and 0,5 mm and two types of buckets, a bucket with gravity of 5 ml and a bucket of 22 ml. In this box you will also find the compressor AC01 dry piston without oil and with automatic start / stop equipped with a manometer which will allow you to control the air pressure, one air filter and one drain and a 1.80m reinforced pipe.
For Angelus paint users, it is recommended to use the 0.5mm nozzle. Dilute the Angelus paint to 50% using 2-Thin thinner, and adding a little Flow Improver (available at our website).
The Flow Improver help the fluidity of the paint, and delays the drying of acrylic paint on the needle and nozzle. Will prevent you from premature clogging of your airbrush.
Note and advice:
Place Angelus 2-Thin in the airbrush reservoir, add some Flow Improver and at last the paint.
If a thick paste sticks at the airbrush needle, stop and use Ultra Cleaner to clean your machine.
To keep your airbrush clean and lubricated, clean it after each use with the PNAGM cleaner from Prince August (available on our web site).