Lascaux Adhesive for heat sealing 375 1 liter,
Lascaux Adhesive for heat sealing 375 1 liter,
Lascaux Adhesive for heat sealing 375 1 liter :
Lascaux 375 Hot Seal Adhesive is a ready-to-use adhesive used in restoration. This preservative has excellent adhesion properties and above all a very good resistance over time.
Application
Lascaux Heat-Seal Adhesive 375 can be applied by spraying, brushing or with a roller. Usually, it is desirable to slightly warm Lascaux Heat-Seal Adhesive 375 in a waterbath and dilute it 2:1 to 1:1 with Benzine 100/140, in order to get the consistency of light cream. Cold or warm application is possible, although warming the Lascaux Heat-Seal Adhesive 375 solution will increase penetration. For spray application, dilute with Toluene, in order to reduce the viscosity. Lascaux Heat-Seal Adhesive 375 is activated only after all solvents required for its application have evaporated (12-24 hours). For lining Lascaux Heat-Seal Adhesive 375 is best applied either on the lining canvas or on an interleaf (e.g. polyester non woven). Heat activation after drying of the solvents at approx. 62-65°C on a hot table, or with an iron or a hot air blower. Heat activation can be done days or week after application of the Lacaux Heat-Seal Adhesive 375. If Lascaux Heat-Seal Adhesive 375 is used for the consolidation of paint layers, it should be diluted 1:4 Benzine 100/140 or White Spirit, or with Toluene to increase penetration (check solubility of paint layer first). Heat activation after complete evaporation of the solvents and under light pressure. Removal of Lascaux Heat-Seal Adhesive 375 can be achieved by the use of either heat or solvents like Acetone or Benzine 100/140.
